American Flagpoles and Flags - Accessories & Parts / Flagpole Trucks (Top Assemblies) / All Products

RTS-1 Series Trucks

Thu, 20 Jan 2011 18:58:00 GMT

RTS-1 Series Trucks" border="0" hspace="3">

Cast aluminum construction with a 2" outside diameter nylon pulley on a 1/4" stainless steel axle. This truck is designed to be used on flagpoles that have up to 3 1/2" outside top diameter with female fitting installed. The bottom of the spindle has a 1 1/4" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a size 1/4"-203NC stainless steel pan head set screw. For ease of rotation , product life and strength, these trucks utilize self-lubricating ball bearing assemblies. Maximum halyard diameter is 5/16".

Visit Flagpole Trucks (Top Assemblies) to see additional products in this category.

RTC-2 Series Trucks

Thu, 20 Jan 2011 18:35:00 GMT

RTC-2 Series Trucks" border="0" hspace="3">

RTC-2 Series Trucks
Buy Now: $90.00

Cast aluminum construction with two 2" outside diameter nylon pulleys on a 1/4" stainless steel axles. Designed to slip over the top of the flagpole and be secured by three stainless steel set screws (1/4"-20NC on the RTC-1-2 and RTC-1-138 and 5/16"-18NC on the RTC-1-238). The top is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a size 1/4"-20NC stainless steel pan head screw. For ease of rotation , product life and strength, these trucks utilize self-lubricating ball bearing assemblies. Maximum halyard diameter is 5/16".

Visit Flagpole Trucks (Top Assemblies) to see additional products in this category.

RTC-1 Series Trucks

Thu, 20 Jan 2011 18:06:00 GMT

RTC-1 Series Trucks" border="0" hspace="3">

RTC-1 Series Trucks
Buy Now: $90.00

Cast aluminum construction with a 2" outside diameter nylon pulley on a 1/4" stainless steel axle. Designed to slip over the top of the flagpole and be secured by three stainless steel set screws (1/4"-20NC on the RTC-1-2 and RTC-1-138 and 5/16"-18NC on the RTC-1-238). The top is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a size 1/4"-20NC stainless steel pan head screw. For ease of rotation , product life and strength, these trucks utilize self-lubricating ball bearing assemblies. Maximum halyard diameter is 5/16".

Visit Flagpole Trucks (Top Assemblies) to see additional products in this category.

OT Series Trucks

Thu, 20 Jan 2011 17:29:00 GMT

OT Series Trucks" border="0" hspace="3">

OT Series Trucks
Buy Now: $25.00

Cast aluminum construction with pulley (1 7/16" outside diameter on OTH, OT1 and OT25; 2" outside diameter on OT2, OT3, OT325 and OT35) on a 1/4" stainless steel axle. Designed to slip over the top of the flagpole and be secured by stainless steel set screws (one 1/4"-20NC on the OTH, three 5/16"-18NC on the OT1, OT2, OT25, OT3, OT325 and OT35). The top is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a size 10-32 stainless steel pan head screw. Maximum halyard diameter is 5/16".

Visit Flagpole Trucks (Top Assemblies) to see additional products in this category.

ST-32 Series Trucks

Thu, 20 Jan 2011 17:07:00 GMT

ST-32 Series Trucks" border="0" hspace="3">

ST-32 Series Trucks
Buy Now: $52.00

Cast aluminum construction with a 1 7/16" outside diameter cast pulley on a 3/16" stainless steel axles. Designed to slip over the top of the flagpole and be secured by three 5/16"-18NC stainless steel set screws. The top is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a size 1/4-20NC stainless steel set screw. Maximum halyard diameter is 5/16".

Visit Flagpole Trucks (Top Assemblies) to see additional products in this category.

ST-1 Series Trucks

Thu, 20 Jan 2011 16:30:00 GMT

ST-1 Series Trucks" border="0" hspace="3">

ST-1 Series Trucks
Buy Now: $28.00

Cast aluminum construction with a 1" outside diameter nylon pulley on a 3/16" stainless steel axle. Designed to slip over the top of the flagpole and be secured by one 1/4"-20NC stainless steel set screw. The top is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a size 10-32 stainless steel pan head screw. Maximum halyard diameter is 1/4".

Visit Flagpole Trucks (Top Assemblies) to see additional products in this category.